Test phase: pre-order, no payment.

For your sportives, gravel rides and ultras

Your route as a sticker, right in front of you the whole ride.

50100150200250Feed 1Feed 1Feed 2Feed 2281 KM · RIDE OF 1 NOVEMBER281 km · 2,070 m climbingTraining for 2027Gel every 40 kmstickprofil.comFeed 1Feed 1Feed 2Feed 2281 kmstickprofil.com 50100150200250Feed 1Feed 1Feed 2Feed 2281 KM · RIDE OF 1 NOVEMBER281 km · 2,070 m climbingstickprofil.com
Illustration · seen from the saddle: my 281 km ride on top of the top tube, the stem and the handlebar.

From €6 · shipping across the EU · shipping costs shown before you confirm · provisional prices

Upload your GPX file: we print the elevation, your feed stops and your distance on a 25 mm wide strip that goes on top of your top tube, handlebar or stem.

Make my sticker Test phase: pre-order, no payment.

Organising an event? One sticker per rider

  1. my-ride.gpx281 km

    1. Upload your route

    The GPX of your ride or event, from Strava, Komoot, Garmin… Where to find the file (in French).

  2. 50100150200250Feed 1Feed 1Feed 2Feed 2281 KM · RIDE OF 1 NOVEMBER281 km · 2,070 m climbingTraining for 2027Gel every 40 kmstickprofil.com

    2. Make it yours

    A theme, your feed stops at their distance, a gel reminder every N km. The preview is the file that gets printed.

  3. 50100150200250Feed 1Feed 1Feed 2Feed 2281 KM · RIDE OF 1 NOVEMBER281 km · 2,070 m climbingTraining for 2027Gel every 40 kmstickprofil.com

    3. Get it, stick it on

    Laminated vinyl planned, cut by hand, sent by post. It goes on top of the top tube, the handlebar or the stem, right where your eyes fall.

Your sticker

Drop in your GPX file: it's read on your phone and only the elevation profile goes with an order, never the coordinates. Tap the profile to add a feed stop. What you see is the file that will be printed, down to the millimetre.

50100150200250Feed 1Feed 1Feed 2Feed 2281 KM · RIDE OF 1 NOVEMBER281 km · 2,070 m climbingTraining for 2027Gel every 40 kmstickprofil.com
160 × 25 mm · top tube Tap the profile to add a feed stop
GPX route
or drag it here from a computer Example loaded: my 281 km ride of 1 November.
Distance–
Climbing–
Max. alt.–
In capitals on the sticker, 40 characters max. No official event names or logos.
Pre-order this sticker

The PDF preview is for checking your sticker (actual size, marked “Preview”); it isn't a print file.

Thomas with his gravel bike

I'm Thomas. I ride road and gravel around Paris, and in May 2027 I'm doing a 360 km gravel race in Spain. On my long rides I wanted to know where the next feed stop was without fiddling with my bike computer: that's where the idea came from. I'll print, laminate and cut every sticker myself, by hand.

Thomas

Two of my rides, as stickers

50100Feed 76Feed 76153 KM · 17 OCTOBER153 km · 1,230 m climbingstickprofil.com
Road, 153 km, 1,230 m of climbing. Navy blue, Oswald font, one stop.
2040608090 KM GRAVEL · 28 OCTOBER90 km · 919 m climbingBar every 30 kmstickprofil.com
Gravel, 90 km, 919 m of climbing. Stem size, Night theme, a bar every 30 km.

Questions

Where does it go?

On top of the top tube, lengthwise, on top of the handlebar next to the stem, or on the stem for the small size: where you can read it with a glance down from the saddle. Not on the side of the tube. The strip is 25 mm wide, to fit on top of most top tubes and handlebars: measure yours before you choose.

Will it survive rain and washing?

The sticker will be printed on vinyl and then covered with a laminate film. Rain and hose tests are planned before orders open; I'll post the results here.

Will it damage a carbon frame?

The vinyl should come off a clear coat without leaving glue behind. A fitting and removal test on a carbon frame is planned before orders open; until then, I won't promise anything I haven't checked.

How do I export my GPX?

Strava (website): on the activity or route, open the “…” menu, then “Export GPX”. Komoot: on the tour, “Download”, GPX file. Garmin Connect: on the activity or course, gear icon, then export to GPX. The wording sometimes changes between versions.

How long does it take?

Nothing is being made yet: you pre-order and I get back to you. The shipping time will be set and shown before orders open.

The organiser hasn't published the route yet?

Use last year's route or a provisional one. Before printing, I'll send you the file to approve, and you can redo it when the final route comes out.

No route yet? Leave your e-mail and I'll write to you once, on the day orders open.

For event organisers

The project is in its test phase. Later on, I'll be able to prepare a sticker per route from your official GPX, to go in the rider pack. Tell me how many riders you expect and when the race packs are handed out: I'll reply with an example on your profile.

Your details are only used to reply to you.

Free tools

Elevation profile generatorYour GPX as an image for a roadbook, a post or a story. Free, no account, your route stays on your device. Export your GPXWhere to find the file on Strava, Komoot, Garmin, Wahoo and RideWithGPS. Guide in French. Read an elevation profileGradients, elevation gain, and why every app gives a different number. Guide in French. Plan your feed stopsWater points, sections, fuelling reminders on a long ride. Guide in French.

A race profile sticker, made from your own route

The sticker shows the elevation profile of your route, worked out from your GPX file and scaled to its length. A 25 mm wide strip on top of the top tube, handlebar or stem: one glance shows you the distance left, the climbs coming up, your feed stops and your gel reminders.

I came up with it for the long gravel rides I'm training for and for my 2027 ultra, but it works just as well on an audax, a sportive or a first 200 km. The sticker in detail.